|*|
Product Overview
The SS963 serial driver is a high-efficiency power driver board. The SS963 serial driver allows you to safely and quickly control thousands of electronic loads, especially stripe leds, RGB Leds and relays. The SS963 basically transfers the 96-bit data it receives serially from the control input to its outputs quickly. Our board designed by Turkish engineers and manufactured in Turkey by local resources with high efficiency at speeds of megahertz level and very low power consumption like 0.5 watts.
The SS963 can transmit up to 100MHz of its data at a rate of 1MHz per output. This speed allows each output to change position 260 thousand times at a time independently of each other. In this way, the desired output speeds can be provided by the input data frequency, allowing the brightness of the light to be adjusted with PWM methods and providing the desired engine speeds. Each output pin has a maximum current capacity of 4.4A and can safely drive 10 meters of a three-chip strip LED with each output pin.
The SS963 also allows stepping motors to be controlled with ability to operate in high frequency currents. A single SS963 can control up to 24 stepper motors.
Features
- PCB size: 6.9 cm x 23.0 cm
- Board size: 6.9 cm x 24.9 cm
- 96 pieces 3A (4.4A max) output
- 1 serial input
- Small size (7cm X 22cm)
- Standard connection slots (IDC connector)
- Wide output operating voltage range (0-30V)
- Compatibility with microcontroller systems (Arduino, NetDuino, MSP430, STM32, Teensy, BeagleBone, MinnowBoard, VoCore)
- Compatibility with microprocessor systems (Raspberry Pi, Banana Pi, Intel Galileo)
Technicial Specifications
- Supply voltage 6v (minimum) 12v (maximum)
- Power consumption ~ 50mA
- Number of control inputs 4
- Number of data entries 1
- Input data length 96 bits
- Number of outputs 96
- Each output current is 3A (normal) 4.4A (maximum)
- Each output voltage is 12v (normal) 30v (max)
- Total output current is 100A (max)
- Data input frequency is 10Mhz (normal), 25Mhz (max)
- Each output frequency is 104KHz (normal), 260KHz (maximum)
- Logic technology 100% CMOS
- Cascade wirable 50 pieces (max.)
- Power indicator led
- Data processing indicator led
- Output active indicator led
- Over-power protection fuse
- Electromagnetic interference protection (Anti-EMI)
